Honda NC700 2012, Service Manual

Page: 700 / 773

20-19
dummyhead dummyhead
ANTI-LOCK BRAKE SYSTEM (ABS)
5. Speed Sensor Line Open Circuit Inspection
Short the ABS modulator 25P connector [1]
terminals of the wire harness side with a jumper wire
[2].
Check for continuity between the terminals of the
wire harness side rear wheel speed sensor 2P
(Gray) connector [3].
Is there continuity?
YES – GO TO STEP 6.
NO – Open circuit in Blue or White wire
6. Failure Reproduction with a New Speed Sensor
Replace the rear wheel speed sensor with a new
one (page 20-26).
Connect the ABS modulator 25P and rear wheel
speed sensor 2P (Gray) connectors.
Erase the problem code (page 20-9).
Test ride the motorcycle above 30 km/h (18 mph).
Retrieve the problem code (page 20-8) and recheck
the ABS indicator [1].
Dose the ABS indicator indicate the code "13,
14, 23 or 43"?
YES – Faulty ABS modulator
NO – Faulty removed wheel speed sensor
PROBLEM CODE 31, 32, 33, 34, 37 or
38 (Solenoid Valve)
1. Failure Reproduction
Erase the problem code (page 20-9).
Test ride the motorcycle above 30 km/h (18 mph).
Retrieve the problem code (page 20-8) and recheck
the ABS indicator [1].
Does the ABS indicator indicate the code "31,
32, 33, 34, 37 or 38"?
YES – Faulty ABS modulator
NO – Solenoid valve is normal (intermittent
failure).
Connection: Blue – White
TOOL:
Test probe
07ZAJ-RDJA110
Connection: Blue – White
W Bu
[3]
[1] [2]
W
Bu
[1]
[1]