Honda NC700 2012, Service Manual

Page: 694 / 773

20-13
dummyhead dummyhead
ANTI-LOCK BRAKE SYSTEM (ABS)
ABS INDICATOR STAYS ON (Indicator
does not go off when the motorcycle is
running, Problem code is not indicated
by the retrieval procedure)
1. Service Check Line Short Circuit Inspection
Disconnect the ABS modulator 25P connector [1].
Check for continuity between the ABS modulator
25P connector of the wire harness side and ground.
Is there continuity?
YES – Short circuit in Brown wire
NO – GO TO STEP 2.
2. Indicator Operation Inspection
With the connector connected, short the
combination meter 16P (Gray) connector [1] of the
wire harness side and ground with a jumper wire [2].
Turn the ignition switch ON and engine stop switch
to " ".
Check the ABS indicator.
Does it go off?
YES – GO TO STEP 3.
NO – Faulty combination meter
3. Indicator Signal Line Open Circuit Inspection
Turn the ignition switch OFF.
Remove the jumper wire from the combination
meter 16P (Gray) connector.
Short the ABS modulator 25P connector [1] of the
wire harness side and ground with a jumper wire [2].
Turn the ignition switch ON and engine stop switch
to " ".
Check the ABS indicator.
Does it go off?
YES – GO TO STEP 4.
NO – Open circuit in Orange/black wire
Connection: Brown – Ground
TOOL:
Test probe
07ZAJ-RDJA110
Br
[1]
Connection: Orange/black – Ground
O/Bl
[2]
[1]
Connection: Orange/black – Ground
TOOL:
Test probe
07ZAJ-RDJA110
O/Bl
[2] [1]