Honda Modular Vehicle Communication Interface, User Manual, Page: 48 / 64

NOTE:
• Make sure the ignition is ON
• Do not turn the MVCI off.
• Do not disconnect the MVCI from the vehicle’s DLC.
12. If an error occurs during updating, leave the ignition
ON , and go to Troubleshooting (Updating Errors) . Press
ENTER to display the error code.
13. When the updating is done, the MVCI beeps, and prompts you to turn the ignition switch
OFF .
14. Turn the ignition back ON within 60 seconds to complete the update. The MVCI displays a countdown timer
that goes away after you turn the ignition
ON .
NOTE: If you do not cycle the ignition switch, an error code sets.
15. When the update is done, the MVCI gives you the option to repeat this system update on another identical
vehicle. Press
Enter to repeat the same system update on another vehicle, or press ESC to exit. See Updating
with the Repeated Mode for more information.
16. Make sure there are no fault indicators displayed.
48