Honda Miimo HRM310 Owner'S Manual Download

Page: 67 / 88

7 MAINTENANCE

Maintenance procedures

Cleaning the docking station

WARNING

- Unplug the transformer’s plug from the building’s power outlet before cleaning it.

Clean dirt and grass off of the docking station using a brush.

Brush off dirt and grass from docking station, particularly around
parts on which the lawn mower rests and around the charging plug area:

Charging plug

Checking

Checking the manual STOP button

WARNING

- Do not touch the blades with your hands.
- Do not lift the lawn mower off of the ground while checking or cleaning it.

Check item(s)

Action

Manual STOP button and
control panel cover

Normal operation of the
manual STOP button (and
the control panel cover)

While performing a test operation of the lawn
mower, press the manual STOP button. If the
lawn mower does not stop (and the control
panel cover does not open), consult your
dealer.

Press the

(On) button on the control panel.

Test a start point (

page 44). When the lawn

mower is moving, press the manual STOP button
and check that the lawn mower stops.

Summary of Contents for Miimo HRM310

























































































Search results

Summary of Contents for Miimo HRM310

Reviews:

Related manuals for Miimo HRM310

Brands by name

Popular brands

Honda Miimo HRM310, Owner'S Manual

Search results

Summary of Contents for Miimo HRM310

Reviews:

Related manuals for Miimo HRM310

Brands by name

Popular brands