34
Setting the lawn mower operation
Home screen
J
[2.Lawn setup]
J
[1.Auto mode]
J
[2.Mowing pattern]
J
[1.Point 1] to
[5.Point 5]
You can select from 3 mowing patterns below:
[Directional]
With the
[Directional]
setting, when
the lawn mower detects the boundary
wire, it turns at a narrow angle. This is
used for mowing narrow areas.
[Random]
With the
[Random]
setting, when the lawn
mower detects the boundary wire, it turns
at a wide angle. This is the most effective
for mowing a large open area of grass. For
normal operation, use this setting.
[Mixed]
With the
[Mixed]
setting, the lawn mower alternates
between the
[Random]
mowing pattern and the
[Directional]
mowing pattern at regular intervals.
You can adjust how the lawn mower moves while
mowing.
The [Mixed] setting is also available. With this setting,
the lawn mower alternates between the Random
mowing pattern and the Directional mowing pattern
at regular intervals.
1
Select [Random], [Directional] or [Mixed].
2
Press the
H
button.
3
Press the
G
button to return to the previous
screen.
Home screen
J
[2.Lawn setup]
J
[1.Auto mode]
J
[3.Advanced setting]
J
[1.Wire overlap]
When the lawn mower detects the boundary wire,
it can slightly cross the boundary to mow the outer
edges of the mowing area. You can adjust how far it
crosses the boundary wire.
NOTE:
- It is better to use default 8 in (20 cm) setting for
smoothly turning on the boundary wire.
1
Enter a value from 8 to 18.
2
Press the
H
button.
Menu screen
Menu screen
