n
Alert Stages
The system has three alert stages for a possible collision. Depending on the
circumstances or CMBS
™
settings, CMBS
™
may not go through all of the
stages before initiating the last stage.
Stage 1: Visual and audible warning.
Stage 2: Visual and audible warning, light brake application.
Stage 3: Visual and audible warning, strong brake application.
n
Changing Settings
Models with Display Audio
Determine the warning timing. The vehicle must be in Park (P) and the
power mode ON.
1. Press the HOME button, the select Settings.
2. Select Vehicle.
3. Select Driver Assist System Setup.
4. Select Forward Collision Warning Distance.
Select from the following options:
Normal, Short, or Long.
n
Turning the System On or Off
The CMBS
™
is turned on every time you start the engine, even if you turned
it off the last time you drove the vehicle.
When you turn the CMBS
™
on and off, do the following:
1. Press the safety support switch.
2. Roll the left selector wheel to the
CMBS
™
symbol and select it.
A beep sounds and a message appears
on the Driver Information Interface. The
CMBS
™
indicator appears when the
system is off.
n
Important Safety Reminder
CMBS is designed to reduce the severity of an unavoidable collision. It does
not prevent collisions nor stop the vehicle automatically. It is still your
responsibility to operate the brake pedal and steering wheel appropriately
according to the driving conditions.
DRIVING
124 |
LaneWatch
™
*1
Allows you to check the passenger side rear areas displayed on the audio/
information screen when the turn signal is activated to the passenger’s side.
Failure to visually confirm that it is safe to change lanes before doing so may
result in a crash and serious injury or death.
Do not rely only on LaneWatch while driving.
Always look in your mirrors, to either side of your vehicle, and behind you for
other vehicles before changing lanes.
n
Activating LaneWatch
Activate the right turn signal. The
LaneWatch display appears. Check the
display for blind spots, and visually
confirm that it is safe to change lanes.
You can also press the LaneWatch
button on the end of the turn signal
switch to view a constant real-time
display. Press it again to turn the
display off.
*1 - If equipped
DRIVING
| 125
