4 EN
SAFETY STICKERS
Your lawnmower must be used with care. Therefore, decals have
been placed on the machine, to remind you pictorially of main
precautions to take during use. Their meaning is explained below.
These decals are considered as a part of the lawnmower. Should
one become detached or unreadable, contact your Honda dealer for
its replacement.
We also recommend that you read the safety advice carefully
(
IDENTIFICATION OF MACHINE
GENERAL DESCRIPTION
EQUIPMENT IDENTIFICATION
[1] WARNING:
Read the owner's manual before using the lawnmower.
[2]
Risk of projections: Keep third persons away from the area during use.
[3]
Risk of cuts. Rotating cutting means: Do not put hands or feet inside the
cutting-means enclosure. Disconnect the spark plug cap before performing
any operation of maintenance or repairs.
[4]
Do not operate without either discharge cover or grass catcher in place.
[5]
The engine emits toxic carbon monoxide. Do not run in an enclosed area.
[6]
Petrol is highly flammable. Stop the engine before refuelling.
[7]
Sound power level
[8]
CE marking
[9]
Nominal power in kilowatt
[10]
Recommended engine speed in min
-1
[11]
Mass in kilograms (with empty tanks)
[12]
Year of manufacture
[13]
Serial number
[14]
Model - Type
[15]
Name and address of the manufacturer
[2]
[1]
[4]
[3]
[1]
[5]
[6]
[A]
[7]
[8] [9]
[11]
[10]
[13]
[14]
[15]
Honda France Manufacturing S.A.S.
Rue des Châtaigniers - Pôle 45
45140 Ormes - France
[12]
CONTROLS
FUNCTIONS
[16]
Handle
[17]
Cutting-means control lever
(Rotostop) (*). . . . . . . . . . . . . . . . .
Couple and stops the cutting means
[18]
Lever for adjusting the
cutting height. . . . . . . . . . . . . . . . .
Selects the desired cutting height
[19]
Folding knob / adjusting the handle (*). . .
Allows you to adjust the height of the
handle or to fold the handle
[20]
Cutting-means control lever
unlocking knob (*) . . . . . . . . . . . . .
Activates cutting-means control lever
[21]
Shift lever (*) . . . . . . . . . . . . . . . . .
Controls the maximum drive speed
[22]
Drive clutch lever (*) . . . . . . . . . . .
Controls the transmission which
drives the rear wheels or the rear roller
[23]
Cutting-means brake lever (*) . . . .
Stops the cutting means rotation and
the engine / Authorises start-up
[24]
Throttle lever (*) . . . . . . . . . . . . . .
Controls the engine speed
[25]
Fuel tank
[26]
Air filter
[27]
Spark plug
[28]
Engine oil reservoir
[29]
Cutting height lever unlocking knob (*)
[30]
Grass catcher . . . . . . . . . . . . . . . .
Collects the cut grass
[31]
Discharge cover . . . . . . . . . . . . . .
Protects the projections
[32]
Recoil . . . . . . . . . . . . . . . . . . . . . .
Allows you to start the engine
[33]
Muffler
[34]
Fuel valve . . . . . . . . . . . . . . . . . . .
Closes / opens the fuel circuit
[35]
Variable mulching control (*). . . . .
Controls the amount of grass ejected
[36]
Select Drive control (*) . . . . . . . . .
Transmission control which drives the rear
wheels. Controls the maximum drive speed
[37]
Lever for folding / adjusting the
handle (*). . . . . . . . . . . . . . . . . . . .
Allows you to adjust the height of the
handle or to fold the handle
[38]
Rear roller (*)
(*) For the models equipped
[24]
[30]
[31]
[19]
[18]
VYEH
[34]
[26]
[29]
[27]
[33]
[28]
[25]
[35]
[16]
[32]
[A]
[17]
[36]
[20]
[36]
[23]
VKEH
STOP
[17]
[22]
[21]
[24]
HYEH
[20]
[38]
[18]
[37]
[17]
[22]
QYEH
[24]
[20]