Honda HS1336i, Owner'S Manual

Page: 130 / 144

128
TAKING CARE OF UNEXPECTED PROBLEMS
JUMP STARTING
Start the engine using the two 12V booster batteries, which are connected in
series.
1. Connect jumper cable A to the positive (+) terminal (1) on booster battery A.
Connect the other end to the negative (—) terminal (2) on booster battery B.
2. Connect jumper cable B to the positive (+) terminal (3) on the snow blower.
Connect the other end to the positive (+) terminal (4) on booster battery B.
3. Connect jumper cable C to the negative (—) terminal (5) on booster battery
A. Connect the other end to the ground bolt (6) on the snow blower.
4. Start the engine (see page 44).
5. Remove the jumper cables in the reverse order.
PO)TERMINAL
JUMPER CABLE B
NEGATIVE(-)
TERMINAL
PO)
TERMINAL
GROUND
BOLT
JUMPER CABLE C
JUMPER CABLE A
PO)
TERMINAL
NEGATIVE(-)
TERMINAL
BOOSTER BATTERY A
BOOSTER BATTERY B
(Two 12 V batteries are connected in series)
(6)
(1)
(5)
(2)
(4)
(3)
31V156250.book 128 ページ ２０２０年１２月２２日 火曜日 午後１時３６分