3
PARTS AND CONTROLS
INITIAL MOWER SETUP
List of Parts
With help from an assistant, carefully remove the mower and loose
parts from the carton and compare the loose parts against the
following list. Contact the authorized Honda dealer from whom you
purchased the mower if any of the loose parts shown are not included
with your mower.
Adjust the Handlebar
1. With the handlebar adjust knobs in the unlocked position, raise the
handlebar into the mowing position.
2. Align the adjust knobs with one of the three holes on each handle
stay. Setting the adjust knobs in the lowest holes raises the
handlebar to its highest position.
3. Turn the handlebar adjust knobs 90 degrees into the lock position,
making sure both sides are positioned at the same height.
4. Remove all the cardboard from around the handlebar.
BLADE CONTROL
LEVER
REAR
DISCHARGE
GUARD
FUEL TANK
CAP
MUFFLER
OIL FILLER CAP
HANDLEBAR
ADJUST KNOB (2)
RECOIL
STARTER
GRIP
CUTTING HEIGHT
ADJUSTMENT
LEVER (4)
GRASS BAG
AIR FILTER
SPARK PLUG
CAP
CARBURETOR
SELECT DRIVE®
CONTROL
CLIP DIRECTOR®
KNOB
ROTO-STOP®
BUTTON
THROTTLE
LEVER
FUEL VALVE ON
FUEL VALVE OFF
Ref.
No.
Description
Qty.
Grass bag frame
1
Grass bag
1
Engine oil and owner’s manual
1
HANDLEBAR ADJUST KNOBS
UNLOCKED
LOCKED
