background image

18

TECHNICAL INFORMATION

Serial Number Locations

There are two serial numbers, one for the engine (located below the 

fuel valve) and one for the mower frame. Record the engine and 

frame serial numbers in the space below. You will need these serial 

numbers when ordering parts and when making technical or warranty 

inquiries.

Engine serial number: _________________________________

Frame serial number: __________________________________

Date of purchase: _____________________________________

High Altitude Operation

At high altitudes, the standard carburetor air-fuel mixture will be too 

rich. Performance will decrease, and fuel consumption will increase. A 

very rich mixture will also foul the spark plug and cause hard starting. 

Operation at an Altitude that differs from that at which this engine was 

certified, for extended periods of time, may increase emissions.
High altitude performance can be improved by specific modifications 

to the carburetor. If you always operate your lawn mower at altitudes 

above 2,000 feet (610 meters), have your servicing dealer perform 

this carburetor modification. This engine, when operated at high 

altitude with the carburetor modifications for high altitude use, will 

meet each emission standard throughout its useful life.
Even with carburetor modification, engine horsepower will decrease 

about 3.5% for each 1,000-foot (300-meter) increase in altitude. The 

effect of altitude on horsepower will be greater than this if no 

carburetor modification is made.

NOTICE

When the carburetor has been modified for high altitude operation, 

the air-fuel mixture will be too lean for low altitude use. Operation at 

altitudes below 2,000 feet (610 meters) with a modified carburetor 

may cause the engine to overheat and result in serious engine 

damage. For use at low altitudes, have your servicing dealer return 

the carburetor to original factory specifications.

Emission Control System

Source of Emissions

The combustion process produces carbon monoxide, oxides of 
nitrogen, and hydrocarbons. Control of hydrocarbons and oxides of 
nitrogen is very important because, under certain conditions, they 

react to form photochemical smog when subjected to sunlight. Carbon 
monoxide does not react in the same way, but it is toxic.

Honda utilizes appropriate air/fuel ratios and other emissions control 

systems to reduce the emissions of carbon monoxide, oxides of 

nitrogen, and hydrocarbons. Additionally, Honda fuel systems utilize 

components and control technologies to reduce evaporative 

emissions.

U.S. and California Clean Air Acts, and Environment 

and Climate Change Canada (ECCC)

U.S. EPA, California and Canadian regulations require all 
manufacturers to furnish written instructions describing the operation 
and maintenance of emissions control systems.

The following instructions and procedures must be followed in order to 

keep the emissions from your Honda engine within the emissions 

standards.

Tampering and Altering

NOTICE

Tampering is a violation of federal and California law.

Tampering with or altering the emissions control system may increase 

emissions beyond the legal limit. Among those acts that constitute 

tampering are:
 • Removal or alteration of any part of the intake, fuel, or exhaust 

systems

 • Alterations that would cause the engine to operate outside its 

design parameters

Problems That May Affect Emissions

If you are aware of any of the following symptoms, have your engine 

inspected and repaired by your authorized Honda Power Equipment 

dealer
 • Hard starting or stalling after starting.

 • Rough idle.

 • Misfiring or backfiring under load.

 • Afterburning (backfiring).

 • Black exhaust smoke or high fuel consumption.

Replacement Parts

The emissions control systems on your new Honda engine were 

designed, built, and certified to conform with EPA, California (models 

certified for sale in California only), and Canadian emissions 

regulations. We recommend the use of Honda Genuine parts 

whenever you have maintenance done. These original-design 

replacement parts are manufactured to the same standards as the 

original parts, so you can be confident of their performance. Honda 

cannot deny coverage under the emission warranty solely for the use 

of non-Honda replacement parts or service performed at a location 

other than an authorized Honda dealership; you may use comparable 

parts certified by the EPA, CARB or ECCC, as applicable, and have 

service performed at non-Honda locations. However, the use of 

replacement parts that are not of the original design and quality may 

impair the effectiveness of your emissions control system.
A manufacturer of an aftermarket part assumes the responsibility that 

the part will not adversely affect emissions performance. The 

manufacturer or rebuilder of the part must certify that use of the part 

will not result in a failure of the engine to comply with emissions 

regulations.

Maintenance

As the power equipment engine owner, you are responsible for 

completing all required maintenance listed in your owner's manual. 

Honda recommends that you retain all receipts covering maintenance 

on your power equipment engine, but Honda cannot deny warranty 

coverage solely for the lack of receipts or for your failure to ensure 

that all scheduled maintenance has been completed.

MODEL NAME AND

FRAME SERIAL NUMBER

ENGINE 
SERIAL NUMBER

Summary of Contents for HRX217VLAA





























Reviews: