Honda HRX217TDA Owner'S Manual Download | Manualshive

Page: 27 / 81

background image

OPERATION

25

Obstacles

Use the side of the mower to cut close to large obstacles, such as
fences or walls.

Release the drive clutch lever to disengage the drive when mowing
around trees and other obstacles. Push the mower around obstacles
for better directional control. Be careful when mowing over obstacles
embedded in the lawn, such as sprinkler heads, paving, edging, raised
tree roots, etc. Avoid anything that sticks up above the surface of the
lawn.

If the blade hits something, or if the mower starts to vibrate, stop the
engine immediately, disconnect the spark plug cap, and check for
damage (see page 32). Striking objects may damage the blades, bend
the crankshaft, and/or break the mower deck or other components.
Vibration usually indicates serious trouble.

The

Distributor’s Limited Warranty

(page 70) does not cover parts

damaged by accident or collision.

Gravel and Loose Objects

Gravel, loose stones, and landscaping material can be picked up by
the mower and thrown many feet with enough force to cause serious
personal injury and/or property damage. The best way to prevent
potential injury from thrown objects is to release the flywheel brake
lever to stop the blades before reaching areas with gravel, loose
stones, or landscaping material.

«
...
25
26
27
28
29
...
»

Summary of Contents for HRX217TDA


















































































Reviews:

No comments

Related manuals for HRX217TDA

Brand: VITO GARDEN Pages: 64

Brand: Snapper Pages: 8

Brand: Rally Pages: 24

Brand: Poulan Pro Pages: 4

Brand: Poulan Pro Pages: 48

Brand: Mountfield Pages: 21

Brand: Jacobsen Pages: 92

Brand: Orbit-Air Pages: 2

Brand: EINHELL Pages: 108

Brand: Briggs & Stratton Pages: 16

Brand: Briggs & Stratton Pages: 16

Brand: Briggs & Stratton Pages: 28

Brand: Kobalt Pages: 22

Brand: Kobalt Pages: 60

Brand: Toro Pages: 12

Brand: Toro Pages: 24

Brand: Toro Pages: 144

Brand: Schulte Pages: 170

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands