background image

7

Add Fuel

This engine is certified to operate on regular gasoline with a pump 
octane rating of 86 or higher.

Never use stale or contaminated gasoline or an oil/gasoline mixture. 
Avoid getting dirt or water in the fuel tank.

You may use regular unleaded gasoline containing no more than 10% 
ethanol (E10) or 5% methanol by volume. In addition, methanol must 
contain cosolvents and corrosion inhibitors.

Use of fuels with content of ethanol or methanol greater than shown 
above may cause starting and/or performance problems. It may also 
damage metal, rubber, and plastic parts of the fuel system.

Engine damage or performance problems that result from using a fuel 
with percentages of ethanol or methanol greater than shown above 
are not covered under warranty. 

If your equipment will be used on an infrequent or intermittent basis, 

(more than 4 weeks before next use), refer to “AVOIDING 

FUEL-RELATED PROBLEMS” on 

page 21

 for information regarding 

fuel deterioration. 

1. Turn the engine off and let cool before refueling.
2. Remove the fuel tank cap.
3. Add fuel into the neck of the fuel tank to the UPPER LIMIT line 

(Approx. 2 inches (53 mm) from the top of the fuel filler neck). Do 

not overfill. Wipe up any spilled fuel before starting the engine.

4. Tighten the fuel tank cap until it clicks.

Move the mower at least 10 feet (3 meters) away from the fueling 

source and site before starting the engine.

NOTICE

Fuel can damage paint and plastic. Be careful not to spill fuel when 

filling your fuel tank. Damage caused by spilled fuel is not covered by 

the 

DISTRIBUTOR’S LIMITED WARRANTY (

page 23

).

OPERATION

For your safety, avoid starting or operating the engine in an enclosed 
area, such as a garage. Your mower’s exhaust contains poisonous 
carbon monoxide gas, which can collect rapidly in an enclosed area 
and cause illness or death.

You may hear a clicking noise as you push the lawn mower forward 
with the engine OFF. This is normal and will not damage the mower.

Safe Mowing Practices

Most injuries and property damage with walk-behind mowers can be 
prevented if you follow all instructions in this manual and on the 
mower. The most common hazards are discussed below, along with 
the best way to protect yourself and others.

Avoid Rotating Blades

Rotating blades can cause serious cuts and even amputate fingers, 
hands, toes, or feet. Keep away from the mower deck whenever the 
engine is running. If you need to adjust the cutting height or work 
around the deck for any other reason, always shut off the engine. 
Wear heavy gloves and disconnect the spark plug cap when you need 
to clean the mower deck or handle the blades.

Clear Mowing Area

Mower blades can throw rocks and other objects with enough force to 
cause serious injury. Before mowing, carefully inspect the area and 
remove all sticks, stones, pieces of wire, and other loose objects. 
Never operate the blades over gravel.

NOTICE

Striking objects with the spinning blades can cause severe engine 

damage, which is not covered by the 

DISTRIBUTORS LIMITED 

WARRANTY (

page 23

).

Keep Shields in Place

Guards and shields are designed to protect you from being hit by 
thrown objects and from hot engine parts and moving components. 
For your safety and the safety of others, keep all shields in place 
when the engine is running.

 WARNING

Gasoline is highly flammable and explosive, and you 

can be burned or seriously injured when refueling.
 • Stop the engine and let it cool before refueling
 • Keep heat, sparks, and flame away
 • Refuel only outdoors
 • Wipe up spills immediately

FUEL TANK 
CAP

2 in

(53 mm)

UPPER 

LIMIT

 WARNING

Exhaust contains poisonous carbon monoxide gas that 

can build up to dangerous levels in closed areas. 

Breathing carbon monoxide can cause 

unconsciousness or death.

Never run the lawn mower in a closed, or even partially 

closed area where people may be present.

 DANGER

The blades are sharp and spin at high speed. If you 

come in contact with a spinning blade, it will cut you 

severely and can amputate fingers and toes.
 • Wear protective footwear
 • Keep your hands and feet away from the mower 

deck while the engine is running

 • Stop the engine before performing any adjustment, 

inspection, or maintenance

Summary of Contents for HRX217HZAA





























Reviews: