53
8. MAINTENANCE - continued
Installation:
1.
Clean dirt and grass from the blades, blade disc and the inside on the cutter
housing.
2.
Install the blade, spring washers, blade washers and self-lock nuts to the
blade disc using the blade setting bolt as described below.
3.
Tighten the self-lock nuts with a torque wrench. Prevent the blade disc
from turning when tightening the self-lock nuts; tighten the self-lock nuts
to the specified torque.
The blade setting bolts are specially designed for the mower. When you
replace them, use only Honda genuine parts. Otherwise, the blade may
detach from the mower and cause serious injury.
Self-lock nuts tightening torque:
29.4 – 39.2 Nm (3.9 kgf
.
m)
