Honda HRS216PKAA, Owner'S Manual

Page: 16 / 24

16
Air Index
An Air Index Information hang tag/label is applied to engines certified
to an emission durability time period in accordance with the
requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability to
compare the emissions performance of available engines. The lower
the Air Index, the less pollution.
The durability description is intended to provide you with information
relating the engine’s emission durability period. The descriptive term
indicates the useful life period for the engine’s emission control
system. See your EMISSION SYSTEM WARRANTY ( page 20 ) for
additional information.
Specifications
Mower Features
Dimensions and Weights
Engine Design and Performance
Maintenance
Descriptive Term Applicable to Emissions
Durability Period
Moderate 50 hours (0 ~ 80 cc)
125 hours (greater than 80 cc)
Intermediate 125 hours (0 ~ 80 cc)
250 hours (greater than 80 cc)
Extended 300 hours (0 ~ 80 cc)
500 hours (greater than 80 cc)
1000 hours (225 cc and greater)
HRS216K7PKAA Honda rotary push mower, 21-inch mower
deck, flywheel brake, side discharge,
Auto Choke System
Length 59.5 in (1,512 mm)
Width 22.9 in (582 mm)
Overall height 39.9 in (1,013 mm)
Dry mass 62 lb (28 kg)
Cutting width 20.9 in (530 mm)
Cutting heights (6) 1-1/8 ~ 4 in (28 ~ 102 mm)
Model GCV160
Type 4-stroke, overhead-cam,
single-cylinder, air-cooled
Displacement 9.8 cu in (160 cc)
Bore and stroke 2.52 x 1.97 in (64.0 x 50.0 mm)
Compression ratio 8.5:1
Ignition system Transistorized magneto
Fuel Unleaded gasoline with a pump
octane rating of 86 or higher containing
no more than 10% ethanol by volume
Capacity: 0.25 US gal (0.93 L)
See “AVOIDING FUEL-RELATED
PROBLEMS” on page 17
page 5
Blade Bolt
Torque
36 ~ 43 ft-lb (49 ~ 59 N•m) page 10
Engine Oil SAE 10W-30, API SJ or later
Capacity: 17.0 oz (0.50 L)
Refill amount: 12.0 ~ 13.5 oz
(0.35 ~ 0.40 L)*
page 11
Spark Plug Type: NGK - BPR5ES
Gap: 0.028 ~ 0.031 in (0.7 ~ 0.8 mm)
page 12
Maximum
Governed
Speed
3,100 +0/-150 rpm ** Shop
manual
Valve
clearance
(cold)
Intake: 0.15 ± 0.04 mm
Exhaust: 0.20 ± 0.04 mm
Shop
manual
* Actual amount will vary due to residual oil in the engine. Always
use the dipstick to confirm the actual level ( page 5 ).
** Do not try to increase the engine speed above the maximum
governed speed; the blade could fracture and come apart.