background image

10

SERVICING YOUR MOWER

Proper maintenance is essential for safe, economical, and 
trouble-free operation. It also helps reduce air pollution.  

To help you properly care for your mower, the following pages include 
a maintenance schedule, routine inspection procedures, and simple 
maintenance procedures using basic hand tools. Other service tasks 
that are more difficult or require special tools are best handled by 
professionals and are normally performed by a Honda technician or 
other qualified mechanic.

The maintenance schedule applies to normal operating conditions. If 
you operate your mower under severe conditions, such as sustained 
high load, high temperature, or unusually wet or dusty conditions, 
consult your servicing dealer for recommendations applicable to your 
individual needs and use.

Remember that an authorised Honda servicing dealer knows your 
mower best and is fully equipped to maintain and repair it. To ensure 
the best quality and reliability, use only new, Honda Genuine parts or 
their equivalents for repair and replacement.

Maintenance Safety

Some of the most important safety precautions follow. However, we 
cannot warn you of every conceivable hazard that can arise in 
performing maintenance. Only you can decide whether or not you 
should perform a given task.

Safety Precautions

• Make sure the engine is off before you begin any maintenance or 

repairs. This will eliminate several potential hazards:

Carbon monoxide poisoning from engine exhaust.

Be sure there is adequate ventilation whenever you operate
the engine.

Burns from hot parts.

Let the engine and exhaust system cool before touching.

Injury from moving parts.

Do not run the engine unless instructed to do so.

• Read the instructions before you begin, and make sure you have 

the tools and skills required.

• To reduce the possibility of fire or explosion, be careful when 

working around petrol. Use only a nonflammable solvent, not petrol, 
to clean parts. Keep cigarettes, sparks, and flames away from all 
fuel-related parts.

WARNING

Improper maintenance, or failure to correct a problem before 
operation, can cause a serious malfunction.

Some malfunctions can seriously hurt or kill you.

Always follow the inspection and maintenance 
recommendations and schedules in this owner’s manual.

WARNING

Improper maintenance can cause an unsafe condition.

Failure to properly follow maintenance instructions and 
precautions can cause you to be seriously hurt or killed.

Always follow the procedures and precautions in this manual.

Summary of Contents for HRR216VKUA

























Reviews: