3
PARTS AND CONTROLS
INITIAL MOWER SETUP
List of Parts
With help from an assistant, carefully remove the mower and loose
parts from the carton and compare the loose parts against the
following list. Contact the authorized Honda dealer from whom you
purchased the mower if any of the loose parts shown are not included
with your mower.
Adjust the Handlebar
1. With the handlebar adjust knobs in the unlocked position, pull the
blade control lever
against the handlebar, and then carefully
raise the handlebar into the mowing position
.
2. Align the adjust knobs with one of the two holes on each handle
stay. Setting the adjust knobs in the lowest holes raises the
handlebar to its highest position.
3. Turn the handlebar adjust knobs 90 degrees into the lock
position, making sure both sides are positioned at the same
height.
4. Remove all the cardboard from around the handlebar.
BLADE CONTROL
LEVER
REAR DISCHARGE
GUARD
FUEL TANK CAP
MUFFLER
OIL FILLER CAP
HANDLEBAR
ADJUST
KNOB (2)
RECOIL
STARTER GRIP
FRONT CUTTING
HEIGHT
ADJUSTMENT
LEVER
GRASS BAG
AIR FILTER
SPARK PLUG
CAP
CARBURETOR
SMART DRIVE
CONTROL
CLIP DIRECTOR
FUEL VALVE ON
FUEL VALVE OFF
HANDLEBAR
REAR CUTTING
HEIGHT
ADJUSTMENT
LEVER
Ref. No.
Description
Qty.
Grass bag
1
Grass bag frame
1
Engine oil
1
Owner’s manual
1
BLADE CONTROL
LEVER
HANDLEBAR
ADJUST KNOBS
UNLOCKED
LOCKED
