Honda HRN216 Series, Manual

Page: 67 / 215

4-6
BLADE HOLDER/ROTO-STOP® HRN216
2. ROTO-STOP
®
/DRIVE PULLEY
VYA TYPE
PARTS REFERENCE
BRAKE PLATE
BALL PLATE
BALL PLATE SPRING
BLADE
HOLDER
SPRING HOOK PLATE
STEEL BALL (3)
DRIVE PULLEY
“ M ” code marking identifies this
drive pulley is for an
HRN216VYA model. Visually
verify this code is correct
before installing.
WOODRUFF KEY
Install in lower
keyway slot.
CLUTCH SPRING
“ UP ” mark towards engine
INSPECT
:
P. 4-10
BEARING
Replace if it
doesn’t rotate
smoothly.
BRAKE PLATE
SPECIAL BLADE
HOLDER BOLT
SPRING
INSPECT: P. 4-10
DRIVE DISK
“ 7 ” mark on the
back identifies
the disk fits the
HRN216VYA
model.
DRIVEN DISK
5-digit code mark starting
with an “ R ” identifies the
disk will fit an HRN216VYA
model.
NOTE:
This is an ink marking and
may be difficult to see, and
may wear off over time.
BEARING
Replace if it
doesn’t rotate
smoothly.