Honda HRM40E, Owner'S Manual, Page: 13 / 107

English |
11
Main
Menu
Sub-menu 1 Sub-menu 2 Explanation
Settings
Mowing mode
Place & Mow Select between a size of 2 m × 2 m and 3 m × 3 m .
Mow without docking
station
Mower will mow in the additional lawn area without docking
station in random mode until it runs out of battery .
Security
Auto Lock If buttons are not pressed for 3 min . they will be automatically
locked .
Recommended for safety reasons and protection against theft .
– On PIN code is required for reactivation after Auto Lock .
– Off The buttons are always ready for input .
Change PIN Changing of a PIN code requires entering of existing PIN code
first.
Alarm
– On Alarm is activated .
– Off Alarm is deactivated .
Date & Time
Change the date and time .
Set Language
Change the display language .
Info
System status Information on battery charge, system information and
operating and charging time for the mower .
Advanced
Wire ID Change the perimeter wire ID when possible interferences are
nearby .
Sensor setting/Lawn
condition
Select between Low (uneven ground), Normal and High
(slippery ground). Mower bump sensor will become more or
less sensitive depending on lawn condition selected .
Remap Deletes the current map of the garden .
Factory Reset Reset the mower to factory settings will delete all personal
settings (not PIN).
After a factory reset, the mower will need to remap the the
lawn areas .
Garden Overview Displays the number of mapped gardens, their size, their wire
ID and the date of the last time the garden was cut .
Delete garden Delete one specific garden map or select to delete all maps at
once .
Name mower Change the name shown in the display . This can be also be
changed in the Honda Mii-monitor App . Only letters of the
Latin alphabet are possible . The number of letters is limited .
This function is not available in every language .
In some languages (e.g. Czech or Polish) a name change doesn't
have effect on display due to specific grammar requests.
Tools
Level check Information about the ground angle of the mower . If the
mower is in the docking station and the dot on the display is
not within the indicated circle, the docking station must be
mounted at a new, more level location .
Wire signal Detects the wire signal received from the perimeter wire,
indicating its strength (for Service Agent).
The mower will not receive a wire signal while in the docking
station .