41
4 MENU SETTINGS
Setting the lawnmower operation
Homing setup
Home screen
J
[2.Garden setup]
J
[4.Homing setup]
J
[1.Passage width]
You can set where the lawnmower moves in relation
to the boundary wire as it goes back to the docking
station.
NOTE:
- This setting must be set to a value lower or equal
than the lowest width value that is set for any
mowing start point setting. For details on the
mowing start point settings, see “Mowing start
point” (
M
page 33).
Passage width sample table
Setup level
Passage width
0
10 cm
1
25 cm
2
30 cm
3
35 cm
4
40 cm
5
45 cm
6
50 cm
7
60 cm
8
70 cm
9
80 cm
10
90 cm
- The field strength varies depending on the length of
the boundary wire. The field becomes weaker with
a longer boundary wire, and stronger with a shorter
boundary wire.
- When the value is high (by avoiding moving along
the same path), you can avoid creating wheel
tracks in the grass.
- The numerical values of this table are for reference
to return the lawnmower to the docking station
along a straight line.
- The numerical values may differ depending on the
actual conditions.
TIPS
Use as big passage width as possible so to
reach the area quickly.
1
Enter a number setting.
2
Press the
H
button.
Menu screen
