HPD L15A7 Engine Kit Assembly Manual
33
8/2012
Oil Pan
cont’d
Install the plug with a new sealing
washer. It is located forward, on the
right side of the oil pan.
Torque the plug to 40 N·m / 30 lb-ft.
Oil Pan Test Fit Checks:
Test fit the oil pan onto engine to
ensure there is clearance at the rear
main bolt heads and girdle. The pan
should sit freely on the mounting
surface. If it does not, use a grinder to
provide further relief space for the rear
main bolts.
Check to make sure the rear surface
of the oil pan is flush with the rear
mounting face of the engine block. If
there is a difference in surface height,
use the supplied shims when
mounting the full circle ring adaptor
mount.
Check to make sure the oil pan has
been notched at the front to provide
clearance for the timing chain
tensioner.
Install the locator dowels that were
removed from the OE oil pan.
Locator Dowels
Summary of Contents for HPD L15A7
Page 1: ......