4
© Honda Access Europe NV. 2006
6709040T
6709030T
REAR DOOR
Installing the Clip
1.
Open the left rear door.
2.
Check the positions where the clip are installed
and clean the surfaces with the cleaner provided
from the kit.
5.
Remove the adhesive backing from each clip.
6.
Align the edge of the clip with the mark on the door
sash, and attach the clip on the sash.
•
Hold the adhesive tape of the clip back side
firmly against the door sash for 15 seconds
after attaching the clip.
3.
Measure each clip installation position to the
dimensions shown.
4.
Mark with a felt-tip pen the position of the
measured dimension of the door sash.
7.
Repeat the procedure to install the clip on the right
side.
5107032H
CLIP INSTALLATION POSITIONS (4)
• Clean the surface with a cleaner.
LEFT REAR DOOR
30 mm
50 mm
30 mm
LEFT REAR
DOOR SASH
Make marks as marks
with felt-tip pen as
shown.
Make marks as
marks with felt-tip
pen as shown.
Make marks as
marks with felt-
tip pen as shown.
CLIP
CLIP
CLIP
ADHESIVE
BACKING
• Remove.
DOOR
SASH
Align the edge of the
clip with the mark
made in the step 4.
Align with the
end of the
radius.
Align with the end
of the radius.
DOOR
GLASS
Align the edge
of the clip with
the mark made
in the step 4.
DOOR
GLASS
Make marks as
marks with felt-tip
pen as shown.
30 mm
www.auto-sonnenschutz.ch
