Honda Grom Page 30 User Manual Download

Page: 30 / 105

n Gu

Steering Lock

Lock the steering when parking to help
prevent theft.
A U-shaped wheel lock or similar device is
also recommended.

❙

Locking

Turn the handlebar all the way to the left.

Push the key down, and turn the ignition
switch to the LOCK position.

Jiggle the handlebar if the lock is difficult
to engage.

Remove the key.

❙

Unlocking

Insert the key, and turn the ignition switch to
the OFF position.

Ignition Switch

Switches the electrical system on/off, locks the
steering.

Key can be removed when in the OFF or LOCK
position.

Turns electrical system
on for starting/riding.

OFF

Turns engine off.

LOCK

Locks steering.

Push

Turn

Ignition key

13 MSX125-32K26B000.book 27 ページ２０１３年１月２９日　火曜日　午後４時５４分

http://www.motorcycle.in.th

Summary of Contents for Grom










































































































Search results

Summary of Contents for Grom

Reviews:

Related manuals for Grom

Brands by name

Popular brands

Honda Grom, User Manual

Search results

Summary of Contents for Grom

Reviews:

Related manuals for Grom

Brands by name

Popular brands