Honda GOLDWING GL1800/A 2015 Owner'S Manual Download Page 85

Page: 85 / 289

Basic Operation & Riding

Braking

If the ABS indicator light blinks while riding, stop the motorcycle in a safe

place and turn off the engine. Turn the ignition ON again. The light should come

on, and then go off after starting to ride. If it does not go off or if it blinks again,

ABS is not functioning.

However, Dual CBS (Linked Braking System) will still provide normal stopping

ability, but you should have the ABS system checked by your dealer as soon as

possible.

The ABS indicator may blink if you place the motorcycle on its center stand and

turn the rear wheel. This is normal. Turn the ignition OFF to stop the blinking.

An amber LED is used for the ABS indicator light. Be sure that the LED lights

when the ignition is ON. If the LED fails to light, see your dealer.

Summary of Contents for GOLDWING GL1800/A 2015


































































































































































































































































































Search results

Summary of Contents for GOLDWING GL1800/A 2015

Reviews:

Honda GOLDWING GL1800/A 2015, Owner'S Manual, Page: 85 / 289

Search results

Summary of Contents for GOLDWING GL1800/A 2015

Reviews: