Basic Operation & Riding
70
Starting & Stopping the Engine
The recoil starter is used to start the engine when the battery is low.
To operate the recoil starter:
1. Turn the ignition switch to the ON (
q
) position.
2. Check that the transmission is in neutral.
3. Unsnap and remove the right side cover (1).
4. Grasp the starter grip (2) firmly, then pull it out slowly
approximately 100 mm (4 in).
5. Pull the grip up briskly and fully.
6. After the engine starts, allow the starter grip to return slowly.
If the starter grip does not return smoothly, see your dealer.
The engine cannot be started if the battery is disconnected, low or
dead.
If the engine cannot be started with connecting the battery, charge
the battery (page 166).
When the engine cannot be started even if the battery is charged,
see your dealer.
Using the Recoil Starter
RIGHT SIDE
(1) right side cover
(2) recoil starter grip
(1)
(2)
19 TRX680FA (U)-32HN8A400.book Page 70 Thursday, June 14, 2018 1:25 PM
Summary of Contents for FourTrax Rincon TRX680FA5 2018
