Honda FourTrax Rancher TRX420FM1 2019, Owner'S Manual

Page: 221 / 270

Taking Care of the Unexpected
211
If the High Coolant Temperature
Indicator Lights
Normally, the high coolant temperature indicator will only light
momentarily when you turn the ignition to ON (
q
).
High coolant temperature may be caused by restriction of air flow to
the radiator (such as mud caked on the radiator), extended idling, an
oil leak, a coolant leak, a low oil level, a low coolant level, or
extended operation under adverse conditions.
If the all segment of the coolant temperature gauge (Except
TRX420TM1) and high coolant temperature indicator are on while
you’re riding, don’t ignore it. Pull safely to a stop. Stop the engine as
soon as it’s safe to do so, and let it cool.
NOTICE
Continuing to ride with high coolant temperature or an overheated
engine can cause serious engine damage.
• A steaming engine indicates a coolant leak. Shut the engine off
and wait until the steaming stops. Look for a leak, but don’t
touch the engine or radiator system. Let everything cool off first.
• Check for any restriction of air flow to the radiator.
• If there’s no obvious problem, leave the engine on so the fan and
coolant circulating system can continue working. Monitor the
coolant temperature gauge (Except TRX420TM1) and high
coolant temperature indicator. The indicator may turn off after a
brief stop with no load on the engine.
• Check the radiator fan.
If the fan is not working, turn the engine off. Open the fuse box
(page 214) and check the radiator fan fuse. If the fuse is blown,
replace it with the proper (same rating) spare fuse. Start the
engine. If the all segment of the coolant temperature gauge
(Except TRX420TM1) and high coolant temperature indicator
stays on, turn the engine off.
If the radiator fan is working, visually check the coolant level in
the reserve tank, located under the left front fender. It isn’t
necessary to touch the radiator system.
19 TRX420TM1 FM1_31HR3650.book Page 211 Tuesday, April 3, 2018 11:37 AM