Honda FourTrax Foreman TRX520FE2 2020, Owner'S Manual

Page: 173 / 287

Servicing Your Honda 163
Clutch System
Your ATV’s shift-activated, wet, multiplate clutch is part of the
primary drive system. Proper adjustment allows a smooth, gradual
engagement when shifting gears.
Refer to Safety Precautions on page 115.
1. Make sure the engine is cool.
2. Make sure the ignition switch is OFF (
w
).
3. Loosen the lock nut (1).
4. Turn the clutch adjuster (2) counterclockwise until you feel slight
resistance.
5. Turn the adjuster 1/4 turn clockwise, then tighten the lock nut to
hold the adjuster in this position.
6. After adjustment, start the engine and test ride your ATV to be
sure the clutch is operating properly.
If you cannot get proper adjustment, or the clutch does not work
properly, the clutch friction discs may be worn. See your dealer or
refer to official Honda Service Manual (page 254).
Clutch Adjustment
LEFT FRONT
(1)
(2) clutch adjuster (1) lock nut
(2)
20 TRX520FE2-31HR48600.book 163 ページ ２０１９年４月２５日 木曜日 午後４時２１分