Basic Operation & Riding
113
Parking
1. Look for level parking area. Make sure the ground surface is firm.
2. After bringing your ATV to a stop, hold the brakes while you shift
into neutral.
3. Set the parking brake (page 50).
4. Turn the ignition switch to OFF (
w
).
If it is necessary to start the engine when your ATV in gear and is
stopped on a grade, rock the vehicle back and forth to allow shifting
the transmission into neutral.
The brake light is activated by applying the parking brake. When
using the parking brake, be sure to turn the ignition switch to OFF
(
w
) to avoid discharging the battery.
Parking on a Steep Incline or a Loose or Slippery Surface
If you must park your ATV on a steep incline or loose or slippery
surface, use the following procedure:
1. While holding the brakes, set the parking brake.
2. Turn the ignition switch to OFF (
w
) and release the brakes.
3. If the ATV begins to move, either while sitting on it or after you
dismount, find a better parking location.
4. If rocks or other objects are available, you can block the wheels
as shown for additional security.
19 TRX500FA5 FA6-FA7 31HR6640.book Page 113 Friday, May 4, 2018 10:57 AM
Summary of Contents for FourTrax Foreman Rubicon TRX500FA5 2019
Page 10: ...19 TRX500FA5 FA6 FA7 31HR6640 book Page 9 Friday May 4 2018 10 57 AM ...
Page 68: ...Instruments Controls 58 19 TRX500FA5 FA6 FA7 31HR6640 book Page 58 Friday May 4 2018 10 57 AM ...
Page 84: ...Before Riding 74 19 TRX500FA5 FA6 FA7 31HR6640 book Page 74 Friday May 4 2018 10 57 AM ...
Page 291: ...PRINTED IN USA WPCXXXX 2018 XX 19 00X31 HR6 6400 31HR6640 ...