n
Storing the Flat Tire
1. Models with aluminum wheels:
Remove the center cap.
2. Place the flat tire face down in the spare tire well.
3. Remove the spacer cone from the
wing bolt, flip it over, and insert it
back on the bolt. Secure the flat tire
with the wing bolt.
Models with wheel covers: Make
sure the wire support ring is on the
outer side of the tire valve.
4. Securely store the jack, jack handle
bar, and wheel nut wrench back into
the tool case. Store the case in the
cargo area.
Loose items can fly around the interior in a crash and can seriously injure
the occupants.
Store the wheel, jack, and tools securely before driving.
Fuse Locations
If any electrical devices are not working, turn the vehicle off and check to see if
any applicable fuse is blown. Fuse locations are shown on the fuse box cover.
Locate the fuse in question by the fuse number and box cover number. Refer to
www.owners.honda.com for a complete fuse chart.
HANDLING THE UNEXPECTED
122 |
n
Engine Compartment Fuse Box
Fuse Box A
Located near the brake fluid reservoir.
Push the tabs to open the box.
Fuse Box B
Pull up the cover on the (+) terminal,
then remove it while pulling out the tab.
Replacement of engine compartment
fuses should be done by a dealer.
n
Interior Fuse Box
Fuse Box A
Located under the dashboard (behind
the instrument panel). Fuse locations
are shown on the label on the side
panel (under the steering column).
Locate the fuse in question by the fuse
number and label number.
HANDLING THE UNEXPECTED
| 123