uu
When Driving
u
Shifting
Dr
ivi
ng
■
Shift Lever Operation
Shift Lever Operation
NOTICE
When you change the shift lever from
(
D
to
(
R
and
vice versa, come to a complete stop and keep the
brake pedal depressed.
Operating the shift lever before the vehicle has come
to a complete standstill can damage the transmission.
Use the shift lever position indicator to check the
lever position before pulling away.
Whichever position the shift lever is in when driving,
a blinking
(
D
indicator indicates a transmission
problem.
Avoid sudden acceleration and have the transmission
checked by a dealer as soon as possible.
The fuel supply may be cut off if you drive at engine
speeds in or over the tachometer red zone (engine
speed limit). If this happens, you may experience a
slight jolt.
It may not be possible to operate the shift lever if the
brake pedal is applied while the shift lever release
button is held down.
Depress the brake pedal first.
Shift Lever Position Indicator
Tachometer’s red zone
Depress the brake pedal and press
the shift lever release button to shift.
Shift without pressing the shift lever
release button.
Press the shift lever release button
and shift.
Main Menu
Table of Contents
Summary of Contents for FIT 2014
Page 153: ...152 Main Menu Table of Contents...
Page 287: ...Main Menu...
Page 288: ...Main Menu...
Page 289: ...Main Menu...