Honda EM5000is, Owner'S Manual

Page: 16 / 104

14
CONTROL & FEATURES
Voltage Selector Switch
Switch Position
AC Circuit Protectors
120/240 V:
120 V ONLY:
PUSH
ON
CIRCUIT PROTECTOR
for Receptacle CIRCUIT PROTECTOR
for Receptacle
CIRCUIT PROTECTOR
for Receptacle
OFF
CIRCUIT PROTECTOR
for Receptacle
120 V 20 A
120 V 30 A
120 V 20 A
VOLTAGE SELECTOR SWITCH
120 V/240 V
120 V ONLY
AC CIRCUIT PROTECTOR
120/240 V
30 A
Select the voltage before starting the engine.
The voltage selector switch switches generator output to produce
‘‘120 V ONLY’’ or ‘‘120 V/240 V.’’ If a 240 V appliance is connected to
the 4-prong receptacle, the switch must be in the ‘‘120 V/240 V’’
position. If only a 120 V appliance is being connected to any of the
120 V 3-prong receptacles, select the ‘‘120 V ONLY’’ position.
Always disconnect or turn OFF all appliances or tools connected to the
generator before changing the voltage selector switch position.
The 120 V and 120 V/240 V receptacles can be used
simultaneously.
ONLY the 120 V receptacles can be used. Do not use the
120 V/240 V receptacle in this position. The most power will be
available at the 30 A 120 V locking plug receptacle.
The AC circuit protectors will automatically switch OFF if there is a
short circuit or a significant overload of the generator at each
receptacle. If an AC circuit protector switches OFF automatically, check
that the appliance is working properly and does not exceed the rated
load capacity of the circuit before resetting the AC circuit protector ON.
11/03/27 07:54:36 31Z11710_015