49
SERVICING YOUR GENERATOR
ENGINE OIL CHANGE
Drain the oil while the engine is warm to assure rapid and complete
draining.
1. Place a suitable container below the engine to catch the used oil,
and then remove the oil filler cap/dipstick, 12×15 mm drain plug,
and sealing washer.
2. Allow the used oil to drain completely, and then reinstall the 12×15
mm drain plug and a new sealing washer. Tighten the plug securely.
TORQUE:
16.6 lbf·t (22.5 N·m, 2.25 kgf·m)
3. With the generator in a level position, fill with the recommended oil
to the upper limit on the oil filler cap/dipstick (see page 48).
Maximum oil capacity:
1.2 US qt (1.1 L)
4. Reinstall the oil filler cap/dipstick securely.
Wash your hands with soap and water after handling used oil.
Improper disposal of engine oil can be harmful to the environment. If
you change your own oil, please dispose of it properly. Put it in a
sealed container, and take it to a recycling center. Do not discard it in a
trash bin, dump it on the ground, or pour it down a drain.
UPPER LIMIT
SEALING
WASHER
(Replace)
12×15 mm
OIL DRAIN PLUG
OIL FILLER CAP/DIPSTICK
31Z236120.book 49 ページ ２０１５年１２月１０日 木曜日 午前１１時４３分
Summary of Contents for EM4000SX
Page 110: ...108 MEMO 31Z236120 book 108...