Honda EG2800i, Owner'S Manual

Page: 16 / 24

16
Air Index
An Air Index Information hang tag/label is applied to engines certified
to an emission durability time period in accordance with the
requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability to
compare the emissions performance of available engines. The lower
the Air Index, the less pollution.
The durability description is intended to provide you with information
relating the engine’s emission durability period. The descriptive term
indicates the useful life period for the engine’s emission control
system. See your EMISSION SYSTEM WARRANTY ( page 21 ) for
additional information.
Specifications
Generator Features
Dimensions and Weights
Engine Design and Performance
Generator
Maintenance
Descriptive Term Applicable to Emissions
Durability Period
Moderate 50 hours (0 ~ 80 cc)
125 hours (greater than 80 cc)
Intermediate 125 hours (0 ~ 80 cc)
250 hours (greater than 80 cc)
Extended 300 hours (0 ~ 80 cc)
500 hours (greater than 80 cc)
1000 hours (225 cc and greater)
EG2800i Lightweight inverter generator with
Eco Throttle
Length 16.9 in (430 mm)
Width 17.6 in (448 mm)
Overall height 18.9 in (481 mm)
Dry weight 66.6 lbs (30.2 kg)
Model GC190
Type 4-stroke, overhead-cam,
single-cylinder, air-cooled
Displacement 11.4 cu in (186 cc)
Bore and stroke 2.71 x 1.97 in (69.0 x 50.0 mm)
Compression ratio 8.5:1
Ignition system Transistorized magneto
Type A type
AC output Rated voltage 120V
Rated frequency 60 Hz
Rated current 20.8 A
Rated output 2.5 kVA
Maximum output 2.8 kVA
Fuel Unleaded gasoline with a pump
octane rating of 86 or higher containing
no more than 10% ethanol by volume
Capacity: 2.14 US gal (8.1 L)
See “AVOIDING FUEL-RELATED
PROBLEMS” on page 18
page 11
Engine Oil SAE 10W-30, API SJ or later
Capacity: 19.6 oz (0.58 L)
Refill amount: 12.0 ~ 13.5 oz
(0.35 ~ 0.40 L)*
page 12
Spark Plug Type: NGK - BPR6ES
Gap: 0.028 ~ 0.031 in (0.7 ~ 0.8 mm)
page 12
Valve
clearance
(cold)
Intake: 0.15 ± 0.04 mm
Exhaust: 0.20 ± 0.04 mm
Shop
manual
* Actual amount will vary due to residual oil in the engine. Always
use the dipstick to confirm the actual level ( page 11 ).