41
SERVICING YOUR GENERATOR
ENGINE OIL CHANGE
Drain the oil while the engine is warm to assure rapid and complete
draining.
1. Turn the engine switch and fuel filler cap vent lever to the OFF
position (see page 26) to reduce the possibility of fuel leakage.
2. Loosen the maintenance cover screw and remove the maintenance
cover (see page 40).
3. Place a suitable container next to the engine to catch the used oil.
4. Remove the oil filler cap, and drain the oil into the container by
tipping the engine toward the oil filler neck.
Improper disposal of engine oil can be harmful to the environment.
If you change your own oil, please dispose of the used oil properly.
Put it in a sealed container, and take it to a recycling center. Do not
discard it in a trash bin, dump it on the ground, or pour it down the
drain.
5. With the generator in a level surface, fill with the recommended oil
(see page 42) to the upper limit of the oil filler neck.
Maximum oil capacity:
14 oz (0.44 L)
6. Reinstall the oil filler cap securely.
7. Reinstall the maintenance cover and tighten the maintenance cover
screw securely.
Wash your hands with soap and water after handling used oil.
OIL FILLER NECK
UPPER LIMIT
LOWER LIMIT
31Z448020.book 41 ページ ２０１９年２月８日 金曜日 午前９時１６分
Summary of Contents for EB2200i
Page 11: ...9 GENERATOR SAFETY 31Z448020 book 9...
Page 89: ...87 MEMO 31Z448020 book 87...
Page 90: ...88 MEMO 31Z448020 book 88...
