78
INITIAL USE INSTRUCTIONS
ENGINE OIL
The generator is shipped
WITHOUT OIL
in the engine.
1.Place the generator on a level surface.
2.Loosen the maintenance cover screw and remove the maintenance
cover.
3.With the generator in a level position, remove the oil filler cap.
4.Add enough SAE 10W-30 API service category SJ or later (or
equivalent) oil to bring the oil level to the upper limit of the oil filler
neck. SAE 10W-30 oil is recommended for general use; for additional
Maximum oil capacity:
13 oz (0.40 L)
Do not overfill the engine with oil.
If the engine is overfilled, the
excess oil may be transferred to the air cleaner case and air filters.
5.Screw in the oil filler cap securely.
6.Reinstall the maintenance cover and tighten the maintenance cover
screw securely.
MAINTENANCE
COVER SCREW
MAINTENANCE COVER
OIL FILLER CAP
UPPER LIMIT
OIL FILLER NECK
31Z398000.book 78 ページ ２０１３年８月１日 木曜日 午後４時３６分
Summary of Contents for EB2000i
Page 11: ...9 GENERATOR SAFETY 31Z398000 book 9...
Page 89: ...87 MEMO 31Z398000 book 87...
Page 90: ...88 MEMO 31Z398000 book 88...
