Honda EB2000i, Owner'S Manual

Page: 29 / 92

27
OPERATION
4.Press the RESET button:
• The RESET button should be flush with the base.
• If the RESET button is not flush with the TEST button, contact an
authorized Honda generator dealer.
• The LED is lit during normal operation.
• The LED is not lit if there is a fault current or during a GFCI test.
• The LED is not lit if the GFCI is faulty. Contact an authorized
Honda generator dealer.
When the RESET button extends during operation.
• Unplug all appliances from the GFCI protected receptacle.
• Press the RESET button.
– If the GFCI can not be reset, the GFCI is faulty. Contact an

authorized Honda generator dealer.
– If the RESET button extends, this usually indicates a faulty power
tool, appliance, or cord. If that occurs, perform test steps 1
through 4 to verify that the GFCI is in proper working order. If the
GFCI tests correctly, then you will know that the fault is in the
power tool, appliance, or cord.

Repair or replace the faulty power tool, appliance, or cord before 
further use.
GFCI RESET BUTTON
LED
31Z398000.book 27 ページ ２０１３年８月１日 木曜日 午後４時３６分