11
EXPLANATIONS OF PARTS
You can turn the power ON and OFF and adjust the sound level with the amplifier unit.
It is not designed to operate the portable audio unit connected to this accessory.
• Note that the volume should be set at an adequate level so you can still hear traffic
sounds. Setting the sound level too high may interfere with safe riding.
• Do not play the digital audio system with an extremely high volume because the sound
gets distorted.
• Do not bring a bank card, commuter ticket or other magnetic cards close to the speaker.
ADVICE
• The last volume setting is memorized by the amplifier unit after the main switch is
turned OFF.
• If the sound is still distorted even after turning down the amplifier volume, turn down the
volume on the portable audio unit.
• If the portable audio unit connected to the digital audio system is equipped with a bass
enhancement function, cancel it because this can distort the sound.
• You may hear “thumps” or “pops” when the power is turned ON or OFF.
USEFUL INFORMATION
VOLUME BUTTON
Push either the UP or DOWN part of
the VOLUME button to adjust the
sound level to your preference.
MUTE BUTTON
Push the MUTE button to temporarily
turn down the sound level to the
minimum.
To disengage the MUTE function,
push the button again.
The POWER light blinks when the
MUTE function is engaged.
POWER LIGHT
POWER BUTTON
Push the button to turn the power ON
and OFF.
The POWER light comes ON and
stays ON when the power is ON.
Untitled-2
11/2/2006, 9:00 AM
11
Summary of Contents for Digital Audio System for Honda Motorcycle
Page 2: ......
