Lights
2. Remove the electrical connector
from the bulb by pulling the
connector straight back.
3. Remove the rubber weather seal
by pulling on the tab.
4. Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way and remove the bulb.
5. Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place and clip the end into
the slot.
6. Push the rubber weather seal over
the bulb.
7. Push the electrical connector onto
the tabs of the new bulb. Make
sure it locks in place.
Turn on the headlights to test the
new bulb.
8. (Passenger's side)
Reinstall the air intake tube.
(Driver's side)
Reinstall the power steering
reservoir.
Maintenance
BULB
CONNECTOR
HOLD-DOWN WIRE
