Neutral (N):
Neutral is selected
automatically when you turn the ignition
switch to the ON position.
If neutral is not selected when you turn
the ignition switch to the ON position.
u
Turn the ignition switch to the OFF position
and then to the ON position again.
u
If neutral is still not selected after turning the
ignition switch to the OFF position, and then
You may hear (click) noises when the
transmission shifts to Neutral (N). This is
normal.
When you can change between N and D
u
Motorcycle is stopped and the engine is
idling.
u
Throttle is completely closed. It is not
possible to change from Neutral to D mode
while the throttle is applied.
u
You cannot change between N and D mode
while the wheels are rotating.
u
Side stand is raised.
NOTICE
To prevent clutch damage, do not use the
throttle to keep the motorcycle stopped uphill.
20171117173519_31MJF8400_enu_BOOK Page 39 Friday, November 17 2017 17:49:33 JST
Operation Guide
36
Shifting Gears
(Continued)