51
O
p
er
at
io
n Gu
id
e
continued
Bluetooth
r
Audio Device
❙
To pair a
Bluetooth
r
audio device
!
a
Select the audio mode 1 or 3 using the
button.
u
The beep signal cannot be heard when
the mode 2 or 4 is chosen.
!
b
Press and hold the
and
6
(down) buttons. The
Bluetooth
r
device
status icon (
Bluetooth
r
mark and left arrow)
starts blinking and the short beep begins to
sound. The motorcycle is in pairing mode.
!
c
Select “Honda Motorcycle Audio” on an
audio device according to its manual.
Registration is completed, blink of the icon
will stop and the long beep (1 second) will
sound.
u
If an audio device cannot be registered,
the short beep sounds three times and the
display returns to the ordinary display.
MODE
MODE
VOLUME
To end the pairing mode on the way, press
and hold the
and
6
(down) buttons.
After pairing, when the audio mode 1 or 2 is
selected with the registered audio device in
connectable state, the audio device will be
connected automatically.
Presence of a
Bluetooth
r
device in the
vicinity sometimes affects the pairing.
Some
Bluetooth
r
audio devices may not be
compatible.
In the following cases, registration will be
canceled.
• An another audio device is registered.
• The audio system is reset.
Bluetooth
r
device
status icon
MODE
VOLUME
14 CTX1300-32MJN6000.book 51 ページ ２０１３年１２月１１日 水曜日 午後２時５１分
