Honda CR-V Hybrid 2020, Owner'S Manual

Page: 642 / 687

640
Han
d
lin
g the U
n
expected
Power System Won’t Start
Checking the Procedure
When the READY indicator does not come on and the Ready To Drive message
does not appear on the driver information interface, check the following items and
take appropriate action.
Checklist Condition What to Do
Check if the related
indicator or driver
information interface
messages come on. The Temperature Is Too Cold For Vehicle To Operate
message appears.
2 Driver Information Interface Warning and
Information Messages
P. 107
The To Start, Hold Remote Near Start Button message
appears.
u Make sure the smart entry remote is in its operating range.
2 POWER Button Operating Range P. 183
2 If the Smart Entry Remote Battery is Weak
P. 641
The POWER SYSTEM indicator comes on. Have your vehicle checked by a dealer.
The transmission system indicator blinks and Transmission
Problem. Apply Parking Brake When Parked message
appears.
2 If the Transmission System Indicator Blinks
along with the Warning Message
P. 654
Check the brightness
of the interior lights. The interior lights are dim or do not come on at all. Have the 12-volt battery checked by a dealer.
The interior lights come on normally. Check all fuses, or have your vehicle checked by
a dealer.
2 Inspecting and Changing Fuses P. 658
Check the shift
position. The transmission is not in ( P . Put the transmission into ( P .
Check the
immobilizer system
indicator. When the immobilizer system indicator is blinking, the power
system cannot be turned on.
2 Immobilizer System Indicator P. 99
1 Checking the Procedure
If you must start the vehicle immediately, use an
assisting vehicle or booster battery to jump start it.
2 Jump Starting P. 643
20 CR-V HYBRID HMIN-31TPG6000.book 640 ページ ２０１９年１１月２８日 木曜日 午後１時５０分