199
uu
Operating the Switches Around the Steering Wheel
u
Brightness Control
Co
ntrols
Brightness Control
When the brightness of the meter will be
reduced, you can use the brightness control
knob to adjust instrument panel brightness.
Brighten:
Turn the knob to the right.
Dim:
Turn the knob to the left.
You will hear a beeper when the brightness
reaches minimum or maximum. Several
seconds after you have adjusted the
brightness, you will be returned to the
previous screen.
■
Brightness level indicator
The brightness level is shown on the driver
information interface while you are adjusting
it.
1
The brightness of the instrument panel will be
reduced when the following conditions have been
met:
•
The power mode is in ON.
•
The light switch is in any position other than off
and it is dark outside.
The brightness can be set differently for when the
exterior lights are on, and when they are off.
Control Knob
20 CR-V HYBRID HMIN-31TPG6000.book 199 ページ 2019年11月28日 木曜日 午後1時50分
Summary of Contents for CR-V Hybrid 2020
