515
uu
Fuses
u
Inspecting and Changing Fuses
Han
d
lin
g the U
n
expected
Inspecting and Changing Fuses
1.
Turn the ignition switch to LOCK
(
0
*1
. Turn
headlights and all accessories off.
2.
Remove the fuse box cover.
3.
Check the large fuse in the engine
compartment.
u
If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.
4.
Inspect the small fuses in the engine
compartment and the vehicle interior.
u
If there is a burned out fuse, remove it
with the fuse puller and replace it with a
new one.
*1: Models with the smart entry system have an
ENGINE START/STOP
button
instead of an ignition switch.
1
Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Replace fuse with a spare fuse of the same specified
amperage.
Confirm the specified amperage using the charts on
P. 513 to 514.
Use the charts to locate the fuse in question and
conform the specific amperage on the fuse label.
2
Fuse Locations
P. 513
There is a fuse puller on the back of the engine
compartment fuse box cover.
Combined
Fuse
Blown Fuse
Fuse Puller
16 CR-V-31T0A6400.book 515 ページ 2016年4月6日 水曜日 午前10時55分