![Honda Clarity 2018 Owner'S Manual Download Page 61](http://html1.mh-extra.com/html/honda/clarity-2018/clarity-2018_owners-manual_2155393061.webp)
114 |
| 115
DRIVING
DRIVING
n
How to Charge (Level 1)
1. Put the transmission into Park (P)
and set the power mode to OFF.
2. Press and hold the charge lid
release button.
Lid Open
Button
Improper usage and handling of the 120-volt charger can cause a fire,
seriously injuring you or others.
Always insert the plug fully into a properly rated and grounded the wall
outlet.
Plug the charging cable directly to the wall outlet. Do not use extension
cords or multi-plug adapters.
Prevent the vehicle charge connector from becoming contaminated.
Clean if necessary.
WARNING
1. The charging cable is stored in
a bag in the trunk. Prepare the
charging cable and open the
vehicle’s charge lid. When in use,
do not tie or coil the cable.
Charge Lid
2. Insert the plug into a 120-volt wall
outlet completely until it stops.
Check that the READY indicator on
the control box comes on.
Plug
READY
Indicator
3. Remove the cover from the
charge connector. Align and
insert the charge connector into
the vehicle’s inlet until you hear
a click. The charge indicator
stops blinking and stays on when
charging starts.
Charge Indicator
Charging Connector
n
How to Charge (Level 2 or Combo)
1. Stop your vehicle at a station
specific for electric vehicles. Park
with the charge lid closest to the
charge plug, just in front of the
driver’s door.
2. Put the transmission into Park (P)
and turn off the power system.
3. Press and hold the charge lid
release button.
Lid Open
Button
4. Open the charge lid. In case
of using with COMBO charge
connector, open the charge lid
and remove the inlet cover.
Charge Lid
5. To connect the cable to the
vehicle, push the cable’s charge
connector until it clicks to the
charge lid. The charge indicator
on the charge lid stays on.
Charge Indicator
Charging Connector