517
Han
d
lin
g the U
n
expected
When You Cannot Disengage the Charging Connector
The
Charging Connector Release Problem. Use Release Lever To Disconnect
message appears on the driver information interface when you cannot disengage
the charging connector.
Disengage the charging connector as follows.
1.
Make sure that charging is completed
correctly.
2.
Open the hood.
3.
Pull the release cord toward you.
u
The release cord returns to its original
position at the next charging.
4.
Press the release button on the charging
connector to disengage it from the inlet.
■
What to Do When Unable to Disengage the Charging
Connector
1
When You Cannot Disengage the Charging Connector
If the problem that you cannot disengage the
charging connector occurs repeatedly, contact an
authorized Honda Clarity Electric dealer to have the
vehicle checked.
Release Cord
17 CLARITY BEV CSS-31TRV6000.book 517 ページ 2017年4月14日 金曜日 午前11時8分
Summary of Contents for Clarity 2017 Electric
