Honda Clarity 2017 Electric, Owner'S Manual

Page: 431 / 543

Continued
429
uu Charging u Charge the High Voltage battery using a Level 1, 2 or SAE J1772 DC charger
Driving
1. Stop your vehicle at a station specific for
electric vehicles. Park with the charge lid
closest to the charge plug, just in front of
the driver’s door.
2. Put the transmission into ( P .
3. Turn off the power system.
4. Press and hold the charge lid release
button.
u The lid opens.
u The illumination lamp inside the charge
lid comes on for a few minutes.
5. Open the charge lid.
6. Remove the inlet cap.
■
How to Charge (DC)
1
How to Charge (DC)
The charge speed slows down towards the
completion of the battery charging.
The charge lid can open by remote transmitter.
Be sure to follow the instructions and safety
precautions provided with the SAE J1772 DC charger
equipment.
While the vehicle is charging or is parked after
running, the compressor may operate to melt any
frost that has formed on the climate control system.
Water from the melted frost drains out through the
front section of the vehicle, near the undercover.
Lid Open
Button
Charge Lid
Inlet Cap
17 CLARITY BEV CSS-31TRV6000.book 429 ページ ２０１７年４月１４日 金曜日 午前１１時８分