2. Prime the jig with grease (A).
•
Shake the BG,HCF grease can
thoroughly.
•
Attach the tube between the aerosol
grease can and the applicator jig.
•
Spray a priming shot of grease through
the jig.
•
Ensure the grease exits top of the jig
freely.
3. Insert the grease applicator jig between
dust cover and damper tube from rear of
vehicle. Do not force the jig under dust cover.
•
Ensure that depth indication mark on jig
(2) is in line with the bottom of the dust
cover(1). Fig B. Relevant to the model
being treated.
CONTINUATION SHEET
Bulletin No
SJ-06-004-05
PAGE 2 OF 4