293
Continued
Main
tenan
ce
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.
1.
Remove the holding clip using a flat-tip
screwdriver, then remove the upper part of
the window washer reserve tank.
2.
Push the tab to remove the coupler.
3.
Rotate the old bulb anticlockwise to
remove.
4.
Insert a new bulb into the headlight
assembly and turn it clockwise.
5.
Insert the coupler into the connector of the
bulb.
High beam headlight: 60 W (HB3 for halogen bulb type)
*
LED type
*
Low beam headlight: 55 W (H7 for halogen bulb type)
*
LED type
*
■
High Beam Headlights
1
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not
need to be adjusted. However, if you regularly carry
heavy items in the boot, have the aiming readjusted
at a dealer or by a qualified technician.
When replacing a halogen bulb, handle it by its base,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
High beam and low beam headlights are LED type.
Have an authorised Honda dealer inspect and replace
the light assembly.
Insert a flat-tip screwdriver, lift and remove the centre
pin to remove the clip.
Models with LED headlights
Holding clip
Centre pin
Models with halogen headlights
Holding Clip
Right side
Bulb
Coupler
Tab
Both sides
* Not available on all models
21 CITY 4D PET (ID KN)-42T00R031.book 293 ページ ２０２１年１月７日 木曜日 午後４時１３分
