uu
Gauges and Displays
u
Gauges
108
In
strum
e
nt Pa
nel
Shows the outside temperature in Celsius.
If the outside temperature has been below 3°C at the time you set the power mode
to ON, the outside temperature indicator blinks for 10 seconds.
■
Adjusting the outside temperature display
Adjust the temperature reading up to ±3ºC if the temperature reading seems
incorrect.
1.
Set the power mode to ON.
2.
Press and hold the
TRIP/CLOCK
button for 10 seconds or more while the outside
temperature is shown on the information display.
u
The information display goes into temperature adjustment mode. The display
starts showing from -3°C to +3°C.
3.
Release the
TRIP/CLOCK
button when the right adjustment amount is shown.
u
The adjustment is complete.
Shows the clock.
Shows the total number of kilometres that your vehicle has accumulated.
■
Outside Temperature
■
Clock
■
Odometer
1
The temperature sensor is in the front bumper. Road
heat and exhaust from another vehicle can affect the
temperature reading when your vehicle speed is less
than 30 km/h (19 mph).
It may take several minutes for the display to be
updated after the temperature reading has stabilised.
You can adjust the temperature reading.
2
P. 119
Models with driver information interface
Except Mexican models
Models with information display
1
You can adjust the time manually or change the clock
display to show the 12 hour clock or 24 hour clock on
the information display
*
or driver information
interface
*
.
2
2
Models with driver information interface
* Not available on all models
21 CITY 4D PET (ID KN)-42T00R031.book 108 ページ ２０２１年１月７日 木曜日 午後４時１３分
