Honda CITY 2017, Owner'S Manual, Page: 374 / 469

373
uu Maintenance Under the Bonnet u Opening the Bonnet
Main
tenan
ce
Opening the Bonnet
1. Park the vehicle on a level surface, and set
the parking brake.
2. Pull the bonnet release handle under the
driver’s side lower outside corner of the
dashboard.
u The bonnet will pop up slightly.
3. Pull up the bonnet latch lever (located
under the front edge of the bonnet to the
centre) and raise the bonnet. Once you
have raised the bonnet slightly, you can
release the lever.
4. Remove the support rod from the clamp
using the grip. Mount the support rod in
the bonnet.
When closing, remove the support rod, and
stow it in the clamp, then gently lower the
bonnet. Remove your hand at a height of
approximately 30 cm and let the bonnet close.
1 Opening the Bonnet
NOTICE
Do not open the bonnet when the wiper arms are
raised.
The bonnet will strike the wipers, resulting in damage
to the bonnet and/or the wipers.
When closing the bonnet, check that the bonnet is
securely latched.
If the bonnet latch lever moves stiffly, or if you can
open the bonnet without lifting the lever, the latch
mechanism should be cleaned and lubricated.
Bonnet Release Handle
Pull
Lever
Support Rod
Grip
Clamp
18 CITY HATC (KX KK KY KP MA PH VT FO)-42T9AR350.book 373 ページ ２０１９年３月１日 金曜日 午後３時５９分