382
Main
tenan
ce
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.
1.
Remove the holding clip using a flat-tip
screwdriver, then remove the upper part of
the window washer reserve tank.
2.
Push the tab to remove the coupler.
3.
Rotate the old bulb to the left to remove.
4.
Insert a new bulb into the headlight
assembly and turn it to the right.
5.
Insert the coupler into the connector of the
bulb.
High beam headlight: 60 W (HB3 for halogen bulb type)
*
LED type
*
Low beam headlight:
55 W (H11 for halogen bulb type)
*
LED type
*
■
High Beam Headlight
1
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not
need to be adjusted. However, if you regularly carry
heavy items in the boot or tow
*
a trailer, have the
aiming readjusted at a dealer or by a qualified
technician.
When replacing a halogen bulb, handle it by its base,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
High beam and low beam headlights are LED type.
Have an authorised Honda dealer inspect and replace
the light assembly.
Models with LED headlights
Models with halogen headlights
Holding Clip
Right side
Bulb
Coupler
Tab
Both sides
* Not available on all models
18 CITY HATC (KX KK KY KP MA PH VT FO)-42T9AR350.book 382 ページ ２０１９年３月１日 金曜日 午後３時５９分
